Spy Camera Power Bank

Features:

• Spy camera and power bank in one product
• Full HD 1080P
• H.264 
• Choice of Resolution includes: 1920 x 1080 / 1280 x 720 / 640 x 480
• Supports up to 32GB Mirco SD Card (not included)
• LED Torch

Specifications:

• Model: DN-806
• Capacity: 3.7V/3000mAh
• Input: DC 5V/1A
• Output: DC 5V/1A; 5V/2.1A
• Color: Black

Before You Start:

• Make sure you have charged the device for 10 or more hours prior to use.
• Plug in the device using the USB cable
• 2nd light from the bottom will be on constant when charging
• The light will go out when the device is fully charged
• This Battery has a built-in 3000mAh Battery and can charge your phone or a device when plugged into one of the USB ports.

Starting up:

• Before using your device please ensure it has been fully charged. Also please note that battery life will improve with continued use as these items have never been used prior to you purchasing them.
• Make sure there is an SD Card in your device. This item takes up to a 32GB SD Card and needs one to work. Without and SD Card this item will not work at all.
• To insert an SD card please locate the slot and insert the SD Card – with the power button facing upwards turn your SD Card upside down and insert it. You will feel resistance on a spring loaded slot – push and the card will click into place.
• When the memory card is full and when the battery is too low to function the 3rd and 4th lights will flash continuously on the device.

Constant Filming Mode:

• When in constant filming mode the camera will film in 10min chunks each time.
• Press the Power button on front of item once
• When the light 3rd from the bottom is on constant the item is in standby mode
• To take a Video Press Power button once and light will flash 3 times slowly
• Press again once to stop filming

Photo Mode:

• Press the Power button on front of item once
• When the light 3rd from the bottom is on constant the item is in standby mode
• Press the Power Button two times in a row
• When the light 4th from the bottom has flashed it will have taken a photo

Torch Mode:

• Press the Power button on front of item once
• When the light 3rd from the bottom is on constant the item is in standby mode
• Press the Power button 5 times in a row and the torch will activate
• Press the Power button once to turn off Torch